admin

Key Accessories & Components:

by

Stainless Steel Pass-Through Boxes: Secure transfer chambers available in static and dynamic (HEPA-filtered) configurations with mechanical or electronic interlocking doors to maintain pressure balance.

Integrated Air Showers: High-velocity air jets remove surface particulates from personnel and equipment before entering high-grade cleanroom zones.

Laminar Flow Workstations: Specialized hood systems delivering localized ISO Class 5 laminar airflow for sensitive benchtop processes.

Air Particle Counters & Environmental Monitors: Real-time monitoring equipment to track pressure differential, relative humidity, temperature, and airborne particle counts.

Sterile Furniture & Storage Cabinets: Stainless steel gowning benches, garment storage racks, step-over benches, and sealable waste bins designed for effortless sterilization.

  • Profiles & Trims (Aluminum or Stainless Steel):
    • C-Channels / Base U-Channels: Floor-mounted tracks that anchor the bottom of wall panels.
    • Inner & Outer Corner Profiles: 2D and 3D coves designed to eliminate 90-degree internal sharp corners, preventing dirt accumulation and making cleaning easy.
    • Ceiling Suspensions & T-Bars: Structural profiles used to support and hang heavy ceiling panels securely.
  • Fasteners & Structural Hardware:
    • Self-Tapping Screws & Rivets: Stainless steel or galvanized fasteners to join panel joints, flashings, and profiles.
    • Threaded Rods & Unistrut Channels: Used for heavy-duty top suspension of ceiling PUF panels.
    • Cam-Locks: Built-in locking mechanisms (in modular tongue-and-groove panels) that pull adjacent panels tightly together.
  • Sealing & Insulation Materials:
    • Silicone Sealants: Non-shedding, anti-fungal silicone applied along all panel seams, joint gaps, and floor interfaces to maintain an airtight seal.
    • PU Expanding Foam Spray: Used to fill small air gaps, penetrations, or cuts around pipes and cable entries for continuous thermal insulation.
    • PE Gaskets & PVC Sealing Strips: Fitted inside tongue-and-groove panel joints to prevent moisture ingress and air leakage.
  • Fixtures & Edge Protectors:
    • PVC / Stainless Steel Kick Plates: Installed at the base of wall panels to protect them from impact by trolleys or heavy equipment.
    • Door Frames & Thermal Break Trims: Specialized framing profiles designed to integrate cleanroom or cold storage doors seamlessly without thermal bridging.
by

High-Performance Modular Cleanroom Solutions

Modular Clean room

Tagline / Subheading: Turnkey Design, Engineering, and Installation for Contamination-Controlled Environments

Overview We design, manufacture, and install custom, high-precision cleanroom environments tailored to strict industry compliance standards. From modular wall systems and HVAC filtration to complete turnkey facilities, our engineering ensures maximum particle control, air purity, and operational efficiency.

Key Features & Capabilities:

  • Turnkey Manufacturing: Full end-to-end execution, from initial CAD layout and panel fabrication to site assembly and validation.
  • ISO & GMP Compliance: Built to meet ISO Class 1 through Class 8 standards, as well as EU GMP and FDA requirements.
  • Modular Wall & Ceiling Panels: Durable, flush-surface panels engineered for easy sterilization, thermal insulation, and minimal particle retention.
  • Integrated HVAC & Air Filtration: Heavy-duty air handling units equipped with HEPA/ULPA filtration to maintain precise pressure differentials, temperature, and humidity.
  • Custom Doors & Accessories: Air showers, pass-through boxes, cleanroom doors, and interlocking systems designed to prevent cross-contamination.

Industries Served :acr360solutions,clean room

  • Pharmaceuticals & Biotechnology: Sterile compounding, drug packaging, and active pharmaceutical ingredient (API) processing.
  • Semiconductor & Electronics: Precision microchip assembly, optics, and nanofabrication.
  • Medical Devices: Sterile packaging, implant manufacturing, and diagnostic assembly.
  • Research Laboratories & Healthcare: Isolation rooms, gene therapy labs, and specialized hospital environments.

Why Partner With Us:

  • Custom Engineering: Tailored layout design based on your process airflow and spatial constraints.
  • Rapid On-Site Installation: Modular components allow faster assembly times with minimal facility downtime.
  • Rigorous Testing & Validation: Full support for commissioning, particle counting, and compliance documentation.

COLD ROOM

by

Cold Room & Cold Storage Solutions

We engineer, install, and service custom Cold Rooms, Walk-in Freezers, and Chiller Facilities designed to maintain precise temperature and humidity conditions for perishable and temperature-sensitive products.

From commercial food storage to high-grade pharmaceutical environments, our turnkey cold storage solutions ensure maximum energy efficiency, reliability, and regulatory compliance.

Solutions & Temperature Capabilities

  • Chiller Rooms (+2°C to +8°C): Ideal for fresh produce, dairy, beverage storage, flowers, and standard pharmaceutical storage.
  • Freezer Rooms (-15°C to -25°C): Engineered for frozen meat, seafood, ice cream, and long-term food preservation.
  • Deep Freezers & Blast Freezers (-30°C to -40°C): Designed for rapid cooling and flash freezing to preserve product texture, freshness, and quality.
  • Multi-Temperature Storage Zones: Multi-room facility layouts with individual temperature controls within a single complex.   

Key Features & Specifications

FeatureDescription / Specification
Insulation PanelsPolyurethane Foam (PUF) or XPS insulated sandwich panels (80mm–150mm thickness) with cam-lock joints.
Surface CladdingPre-painted Galvanized Steel (PPGI), Stainless Steel (SS304), or Food-Grade FRP sheets.
Refrigeration UnitsEnergy-efficient condensing units and evaporators paired with eco-friendly refrigerants.
Doors & SealsHeavy-duty hinged or sliding doors equipped with internal safety release handles and perimeter heaters.
Controls & MonitoringMicroprocessor-based digital temperature controllers with remote monitoring and alarm systems.
FlooringAnti-skid checkered aluminum or reinforced concrete slab with under-floor heating for freezers.

Applications & Industries Served

  1. Food Processing & Logistics: Commercial kitchens, meat/seafood processing plants, distribution centers, and supermarkets.   
  2. Pharmaceuticals & Healthcare: Vaccine storage, laboratory samples, blood banks, and chemical storage following FDA / GMP guidelines.   
  3. Agriculture & Horticulture: Post-harvest storage for fruits, vegetables, seeds, and floriculture.
  4. Hospitality & Retail: Hotels, restaurants, catering services, and wholesale hubs.

Why Choose Us?

  • Customized Engineering: Designed to fit your exact site dimensions, capacity needs, and thermal requirements.   
  • Energy-Efficient Systems: High-density insulation and smart cooling controls reduce operating costs.
  • Hygienic & Compliance Ready: Easy-to-clean surfaces meeting international food safety and hygiene standards.
  • Complete Support: End-to-end service from site survey and design to installation and 24/7 maintenance